Unhandled exception Unhandled e0434f4dh exception at 7c81eb33h when using AutoCAD 2010-based product
The solution for this issue has been recently posted in the Autodesk Knowledge Base. ID TS1106848 2009-Apr-14
After installation, you were able to start the product, but when you tried to execute a command or select one of the UI items, the product crashed with the following error message:
Unhandled e0434f4dh exception at 7c81eb33h
This error is caused by Microsoft .NET Framework 3.5 Service Pack 1 not being installed properly. You can download and install Microsoft .NET Framework 3.5 SP1 directly from the Microsoft website here
Once you have installed .NET Framework 3.5 SP1, the product will work as expected.
4 comments
Nice post!
Fixed my problem!
Loading...
thank you soooooooooooo much!!!
You saved me 🙂
Loading...
Already installed .NET, but the problem continuos…my fatal error says exception at 7c812fd3h not 7c81eb33h, is it a diferent problem ?
Nice post!
Fixed my problem!
thank you soooooooooooo much!!!
You saved me 🙂
Already installed .NET, but the problem continuos…my fatal error says exception at 7c812fd3h not 7c81eb33h, is it a diferent problem ?
The memory address being different indicates it is a different issue. I don’t have enough detail about your system or when it occurred to guess what the cause might be.
It could be another system resource library like MS Visual C++ as was the case in a similar forum posting: http://forums.autodesk.com/t5/AutoCAD-Architecture-General/Fatal-Error-unhandled-e0434352h-exception-at-7c812afbh/m-p/3947714#M44075